Skip to main content

SFA/PFA

Scope

This firmware is released by product series, not named after a single model. The following models in the same series share the same firmware set:

SFA1800, PFA2000

The firmware package contains the firmware of the BMS SLAVE, DCDC modules. Each module is updated independently, so refer to the relevant section as needed.

BMS SLAVE​

Release DateVersionUpdate Summary
2026/7/22V1.10.491. Optimized operating logic
2026/05/12V1.10.451. Optimized battery protection and operating logic
2026/02/11V1.10.421. Optimized SOC algorithm
2026/01/21V1.10.381. Optimized SOC algorithm
2025/11/28V1.10.351. Optimized upgrade logic
2025/10/04V1.10.331. Optimized self-check logic
2. Optimized standby power consumption
3. Added pre-charge logic
2025/07/31V1.10.301. Optimized charging detection, improved upgrade communication stability, enhanced discharge protection
2025/06/16V1.10.25/
2025/05/30V1.10.22/

DCDC​

Release DateVersionUpdate Summary
2026/07/22V1.01.771. Optimized operating logic
2026/05/29V1.01.751. Optimized the issue where charging power could occasionally be limited when multiple battery packs were charged
2026/05/10V1.01.731. Optimized operating logic
2026/03/20V1.01.641. Fixed occasional communication loss of battery packs during deep standby in multi-pack systems
2026/03/04V1.01.621. Optimized battery pack communication
2026/02/11V1.01.611. Optimized battery pack communication
2026/01/21V1.01.591. Fixed SOC imbalance caused by low-power discharge
2025/11/28V1.01.541. Fixed PV limitation issues in some conditions
2. Optimized upgrade logic
2025/11/04V1.01.511. Optimized bypass port logic
2025/10/14V1.01.481. Optimized PV charging logic
2. Optimized heating film operating logic
2025/08/27V1.01.39/
2025/07/31V1.01.361. Added reverse current protection, optimized discharge power, fixed charging overcurrent issues, added intelligent low-light detection, enhanced overload protection
2025/06/17V1.01.28/
2025/06/04V1.01.23/