Profile

Click the Profile tab in the bottom navigation bar to enter the page. This page is used to manage account information, adjust app settings, and configure personalization options.

1. Account

Tap Account to enter the account settings page, where you can view and manage all account-related configurations.

1.1 Profile

Tap Profile to enter the detailed account page where you can update your profile picture, change your username, and update your bound email or phone number.

1.2 Change Password

Tap Change Password, then follow the instructions to enter your current and new passwords. After saving successfully, the system will automatically redirect you to the login page, where you can sign in again using the new password.

1.3 Delete Account

warning

Deleting your account will permanently erase all associated data and cannot be undone. Please proceed with caution.

1. Delete all homes under your account.

2. Tap Delete My Account to begin the account cancellation process.

3. Carefully review the on-screen instructions and the “Account Cancellation Reminder”. Confirm that you meet the conditions and understand the consequences. If no concerns, check I have read and agree Account Cancellation Reminder.

4. Tap Confirm Cancellation to proceed.

5. For security, the system will require identity verification: enter your password and verify your bound phone number or email.

6. Enter the confirmation code received, then tap Done to complete the account deletion.

   

1.4 Log Out

Tap Log Out to securely exit your current account. The system will return to the login page.

1.5 Remember Password

The Remember Password feature allows you to save your account login password and the Wi-Fi password used during device network setup, so you won’t need to enter them repeatedly.

You can enable or disable password saving (including both login and Wi-Fi passwords) anytime by toggling the Remember Password switch.

2. Home

Tap your current home name to enter the home information page.

2.1 Add Home

1. Tap the + button in the upper right corner.

2. On the new page, complete the home information:

   • Home Name: Set a recognizable name for the home.
   • Location: The app automatically detects your country; you may also manually select it.
   • Home Address: The app auto-fills an approximate area; you may tap the icon next to the address bar to re-locate on the Mapbox map.

3. After confirming all information, tap Add. The new home will immediately appear in your home list.

   

2.2 Edit Home

You can edit the following home information:

2.2.1 Home Name

Tap the name field to modify it.

2.2.2 Home Address

Tap the address field to reselect or relocate.

2.2.3 Grid and PV

Configure your home's electricity usage and feed-in options:

• Whether you purchase electricity from the utility company.

• Whether your household approved to sell electricity to the utility company.

  

2.2.4 Add Home Member

1. Tap Add home members.

2. Select the member’s permissions:

   Permission	Description
   Member	View home and device data only.
   Administrator	Can add and remove devices and members, set home information.

3. Tap Next.

4. Enter the user’s account (email or phone number).

5. Tap Search.

6. In the search results, tap the add icon next to the user.

7. When the Added successfully message appears, the process is complete.

   

2.2.5 Manage Home Member Permissions

1. In the member list, tap the member whose permissions you want to modify.

2. Tap the Family Permissions field.

3. Choose a new permission level:

   Permission	Description
   Member	View home and device data only.
   Administrator	Can add and remove devices and members, set home information.
   Owner	Transfers home ownership; you will lose all permissions for this home.

4. Tap OK.

   

2.2.6 Remove Home Member

At the bottom of the member information page, tap Delete. The app will ask for confirmation; after confirming, the member will be removed.

2.3 Delete Home

warning

This action is irreversible and will erase all data for this home. Please proceed carefully!

At the bottom of the home management page, tap Delete. After confirmation, the home will be removed.

3. Tariff

After setting the electricity price in the app, the system can calculate energy costs and revenue, and enable features such as dynamic pricing mode and AI mode.

Tap Tariff to enter the electricity price management interface.

3.1 Add Electricity Price

Click the + Add Electricity Price button to create a new import or export price.

The setup process for import and export prices is similar. The following uses the import price as an example:

1. Set the start and end time of the pricing plan.

   • The end time is set to "Now" by default, and the price will continue to apply.

     

   • To configure a historical time period, turn off the "Now" option and manually select the time range.

     

2. Select your area.

3. Choose your electricity supplier from the list.

4. According to your electricity contract, select the pricing type and complete the configuration:

   • Fixed Rate: The price remains constant throughout the day and does not change over time. Set the current fixed import price.

     

   • TOU Rate: Prices vary by time periods, with different rates for peak and off-peak hours. Set prices for each time period of the day.

     

   • Dynamic Rate: Prices change in real time based on the market. Configure the pricing formula:

     Custom tariff = (Wholesale price × Coefficient + Service fee) × (1 + VAT)

     

5. Click Save to complete the pricing configuration.

info

The tariff settings here are used for in-app visualization and estimation only. Actual billing is subject to your electricity provider’s official data.

3.2 View Historical Tariffs

Tap the icon in the upper right corner to view past electricity price.

4. Cluster

Cluster settings allow you to combine multiple energy storage devices or inverters - via wired or wireless connections - into a unified system for expanded capacity and load balancing.

Prerequisite

• At least one energy storage device and one compatible device must exist in the current home.
• All devices participating in clustering must be powered on and connected to the same Wi-Fi network.

You must configure main-sub mode: designate one device as the main device, with the others acting as sub-devices, coordinated by the main.

👉 For detailed cluster setup and configuration instructions, please refer to the Cluster Guide.

5. Data Source

With Data Source settings, you can specify the data sources used for home energy statistics to improve the accuracy and reliability of analytical results. The system supports four types of data sources: Solar, Battery, Grid, and Load.

1. Tap Data Source to enter the configuration page.

2. Select the data source type you want to configure.

3. Click Custom on the right and select one or more devices as the statistical input for this data source.

4. After completing the selection, tap Save to apply the settings.

   

6. Display

Tap Display to customize the app’s appearance and formatting preferences.

6.1 Language

Support multiple interface languages: Simplified Chinese, English, French, German, Italian and Dutch.

6.2 Dark Mode

Turn on or off dark mode to suit different lighting environments.

6.3 Temperature Unit

Choose your preferred temperature unit: Celsius (℃) or Fahrenheit (℉).

6.4 Date and Time Format

Customize the display format for date order and 12-/24-hour clock.

6.5 Decimal Display Preference

Select your preferred decimal separator: dot or comma.

Tap Save and all changes will take effect immediately. You can return anytime to adjust preferences.

7. Operation Services

For easier maintenance, you can add and manage service providers (such as retailer and installers) via Operation Services. After authorization, a provider can view your basic device information to offer more accurate support.

8. Direct Device Connection

Direct Device Connection uses Bluetooth for nearby communication, allowing you to monitor and manage supported devices without connecting to the home network.

info

This feature currently supports INDEVOLT home energy storage system:

• BK1600
• BK1600 Ultra
• SolidFlex 2000
• PowerFlex 2000

More devices will be supported in the future. Please stay tuned.

Prerequisite

Ensure Bluetooth is enabled on your phone and the target device is powered on and ready for pairing.

1. Tap Direct Device Connection.

2. Scan the device QR code using the app for automatic identification.

3. Tap Connect to Device and move your phone close to the device. The system will establish a Bluetooth connection.

4. After successful connection, you may view real-time data, set charge/discharge schedules, and configure parameters.

5. Tap the back arrow (<) in the upper-left corner to exit.

   

9. Remote Support

This function helps after-sales technicians quickly locate and resolve potential device issues.

Prerequisite

• Ensure the device is powered on.
• Keep the Bluetooth connection stable during debugging. It is recommended to set your phone screen to stay awake to avoid disconnection.

1. Tap Remote Support.

2. Read the information and tap Next.

3. Scan the device QR code or manually enter the SN to establish a Bluetooth connection.

4. The system will generate a Remote ID. Provide this ID to the technician for remote diagnosis.

   

Exit Remote Support:

• Tap the Exit Support Mode button to manually end the remote debugging session.
• Alternatively, the technician can end the session, and the app will automatically notify you that the debugging has ended.

Device Connection Failed:

• Please make sure that Bluetooth is enabled on your phone and that it is successfully connected to the device.
• Tap Retry to re-establish the device connection.
• Keep your phone screen on and remain on the Remote Support page.

info

• The debugging process does not affect normal device operation.
• This feature is for authorized technicians only - do not share the ID with unauthorized parties.
• After debugging, please exit the mode to end the remote session and ensure security.

10. About INDEVOLT

Tap About INDEVOLT to learn more about the app, including the current version, service and privacy agreements, third-party information sharing list, permission descriptions, and system permission management.